lenovo thinkcentre m72e Bios Update fehler. was tun?
Moin Moin, habe folgendes Problem: Das Bios meines Lenovo Thinkcentre M72E Ivy lässt sich nicht updaten.
der Fehler lautet: "18-Error: Unable to start a secure Flash session.
Child process failed. Return code 24.
Aktuell instaliert ist die Version "F1KT24AUS" (Date: 08.16.2012)
Die Version die ich Updaten will "F1J974USA" (Date: 08.15.2018) (Original ISO von Lenovo website auf Datenträger gebrannt)
Muss das Bios Updaten da ich eine RX570 Auf das Brett knallen möchte, jedoch zickt das teil dermaßen rum das ich langsam die lust verliere. Ich habe auch das Updaten mit der Datei für das Flash in windows selbst ausprobiert aber auch da kommen in der CMD bei Admin rechten die selben Fehlermeldungen. Cmos Habe ich auch schon zurück gesetzt, neue Bios Batterie, anderer Ram, Sogar andere CPU. Der Fehler kommt immer und immer wieder. Zwei anrufe bei Lenovo haben eben so wenig geholfen da die mich laufend auf die Website verwiesen haben mit dem argument "Bitte Bios neu runterladen"
natürlich könnte ich jetzt einfach ein anderes sockel 1155 board kaufen, aber ganz so einfach wollen wir es nun auch nicht, ich mein das board läuft.. warum also ersetzten? muss ja upzudaten sein.
Falls jemand ahnung hat wie ich diese verfluchte teil auf den neusten stand bekomme währe ich echt dankbar um hilfe.
2 Antworten
Ob das Problem darin liegt, daß das eine ein AUS(tralia) und das andere ein USA Image ist, kann ich nicht sagen, aber bei 6 Jahren Zwischenzeit hilft eventuell ein Flash auf ein Intermediate-Image, also eine Version die zwar neuer ist, die aber vom aktuellen BIOS akzeptiert wird und die dann wiederum das neuere Image akzeptiert.
MAnchmal ist es ein krüppeliges Detail, das neuste Image ist mit einem Schlüssel signiert worden, den das älteste BIOS nicht kennt, oder die Schnittstelle hat sich leicht verändert, oder oder oder.
Auf der Downloadseite gibt es noch eine Version von März 2018 - in einem Forenbeitrag schreibt ein User, bei dem die neuste Version scheiterte, daß er damit Erfolg hatte.
https://support.lenovo.com/us/en/downloads/ds029433
Unten die 73er Version.
Wenn es mit dieser auch nicht klappt, dann wäre wohl der 'Support' gefragt.
top, probiere es, habe allerdings all meine 20 rohlinge deshalb verbraten, müsste es via usb stick machen, muss der bootfähig sein? oder einfach die entpackten daten drauf und gut is?
Da müßte ich selbst gerade nachlesen, meistens reicht es ja, wenn das Image auf einem FAT32 Stick ist. (Manche Platformen haben ja auch ein Flashtoll in der Firmware, bei massiven Änderungen muß dann aber via USB/Disk geflasht werden)
Ich muß also sagen: Hier kommt es ganz auf Lenovo an.
Muß wohl ein Bootbarer Stick mit DOS sein :-(.
ach hör mir auf, was ich diese woche mit denen rumtelefoniert habe, und als sagen die "laden sie die bios version neu runter" ist ja nicht so das ich immer und immer wieder die selbe version lade haha, nur ärger mit dem ding. öhm, gibts da ein tool das den stick iwie passend bootable macht?
Rufus sollte in der Lage sein einen Stick 'Bootbar zu erzeugen mit einem 'Minimaldos', wenn ich das recht im Kopf habe.
Einfach Startfähiges LAufwerk erstellen und in der Dropbox z.B. Freedos wählen, das sollte es (hoffentlich) gewesen sein. Dateien auf den Stick entpacken udn dann vorher schauen, was Du afudos(?) als Parameter angeben mußt.
Achtung: ggf. ist das Tastaturlayout nicht angepasst ... wenn Dich das aber nicht stört ...
Ehrenmann!! es hat geklappt! Habe es über Windows (CMD) mit der von dir verlinken version geupdatet, ohne mucken! Solche Leute wie du könnte Lenovo im Support gebrauchen. Dickes fettes DANKE! Closed
Probier das mal aus!
Recovering from a POST/BIOS update failure
If the power to your computer is interrupted while the POST and BIOS is being updated, your computer might not restart correctly. If this happens, perform the following procedure to recover from the POST and BIOS update failure. This procedure is commonly called Boot-block Recovery.
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Open the computer cover. See “Removing the computer cover” on page 91.
3. Remove the hard disk drive. See “Replacing the primary hard disk drive” on page 122
4. Locate the Clear CMOS /Recovery jumper on the system board. See “Locating parts on the system board” on page 89.
5. Remove any cables that impede access to the Clear CMOS /Recovery jumper.
6. Move the jumper from the standard position (pin 1 and pin 2) to the maintenance position (pin 2 and pin 3).
7. Reconnect any cables that were disconnected and reinstall the PCI card if removed.
8. Close the computer cover and reconnect the power cords for the computer and monitor to electrical outlets. See “Completing the parts replacement” on page 150.
9. Turn on the computer and then insert the POST and BIOS update (flash update) disc into the optical drive. Wait a few minutes. Then, the recovery session begins. The recovery session will take two to three minutes. During this time, a warning message will be displayed and no action is needed from you.
10. After the recovery session is completed, there will be no video, and your computer will automatically turn off.
11. Repeat step 1 through step 5.
12. Move the Clear CMOS /Recovery jumper back to the standard position (pin 1 and pin 2).
13. Reconnect any cables that were disconnected and reinstall the PCI card if removed.
14. Close the computer cover and reconnect any cables that were disconnected.
15. Turn on the computer to restart the operating system.
So, habe es zwei mal probiert, zeigt keine Positive Wirkung!
in der tat, einmal vor dem starten, dann sogar bei umgesteckten jumper gestartet und auch ohne bios batterie versucht, immer die selbe fehlermeldung. bios ist jetzt wieder auf standart hat drei mal gepiept und er wollte das ich im bios die zeit, boot reihenfolge einstelle. beim bios update boot crasht das ganze aber wieder
Das dachte ich mir auch schon, das man Version für Version nach und nach updaten muss, aber wo bekomme ich die alten versionen her? lenovo stellt kein Archiv zur verfügung und google spuckt nichts aus.