Pitch/ modwheel from M- Audio Oxygen Pro Mini not working in Fl Studio?

1 Antwort

The issue with the pitch/modwheel not working on your M-Audio Oxygen Pro Mini in FL Studio is likely related to MIDI settings or controller mapping. Here’s a step-by-step guide to troubleshoot and potentially fix the problem:

### 1. **Ensure Proper MIDI Setup in FL Studio**

  - Open FL Studio and go to **Options** > **MIDI Settings**.

  - Under **Input**, ensure your **M-Audio Oxygen Pro Mini** is listed and enabled. If not, select it and click the **Enable** button.

  - Set the **Controller Type** to **Generic Controller** (if not already set).

### 2. **Check the Pitch/Modwheel Functionality**

  - Test the pitch/modwheel by selecting any plugin that reacts to pitch bend or modulation (e.g., a synth like Harmor or Sytrus).

  - Move the pitch/modwheel and observe if there’s any movement on the plugin interface. If there’s no response, proceed to the next steps.

### 3. **Reset MIDI Controllers**

  - In FL Studio, go to **Options** > **MIDI Settings**.

  - Click **Reset all MIDI devices** to refresh the connection between FL Studio and your controller.

### 4. **Check MIDI Mapping**

  - Sometimes, the pitch/modwheel might not be mapped correctly.

  - Open a plugin that has pitch/modwheel capability, then move the pitch/modwheel on your Oxygen Pro Mini.

  - Right-click the control (like pitch or mod) in the plugin, and choose **Link to controller**. Then, move the pitch/modwheel on the Oxygen Pro Mini to map it correctly.

### 5. **Firmware/Software Updates**

  - Ensure that your M-Audio Oxygen Pro Mini has the latest firmware. Visit the M-Audio website and download any necessary updates.

  - Also, check if FL Studio has any available updates that might fix the issue.

### 6. **Use M-Audio Preset or Script**

  - M-Audio provides presets or scripts for popular DAWs like FL Studio. Download the relevant script from M-Audio’s website if available and install it.

  - Sometimes using the official preset or script can solve issues related to control mapping.

### 7. **Test in Another DAW**

  - To rule out a hardware issue, test your M-Audio Oxygen Pro Mini in another DAW (like Ableton Live, if you have it) to see if the pitch/modwheel works there.

### 8. **Check Global Settings on the Oxygen Pro Mini**

  - The Oxygen Pro Mini has various global settings that might affect the pitch/modwheel functionality. You can reset these to default settings by consulting the manual.

### 9. **Reinstall the MIDI Driver**

  - If the issue persists, reinstall the MIDI driver for your Oxygen Pro Mini. This can be done through the Device Manager in Windows or relevant software on macOS.

### 10. **Factory Reset the Controller**

  - As a last resort, you can perform a factory reset on the Oxygen Pro Mini. This will reset all settings to their defaults.

  - To do this, hold down the **Shift + Bank Left + Bank Right** buttons while powering on the device.

### Additional Notes:

- Sometimes, issues like this can be a result of conflicts with other MIDI devices. Try disconnecting other MIDI controllers to see if the problem persists.

- Make sure your USB cable is working properly, as a faulty connection can cause intermittent issues.

If you’ve followed these steps and the issue is still unresolved, the problem might be hardware-related, and you should consider reaching out to M-Audio support for further assistance.


Johann821 
Beitragsersteller
 25.09.2024, 17:13

Thank you brother. It helped me a lot and I'm sorry that I answered so late. Thank you for your effort.