Cisco 7940G - reagiert nicht auf Anrufe von außen?

Question

Hallo,ich habe ein Cisco 7940G mit SIP Firmware an einer FreePBX/Asterisk Telefonanlage angeschlossen. Das Telefon meldet sich ordnungsgemäß an und ich kann nach außen ohne Probleme anrufen.Rufe ich jedoch auf dem Telefon an bzw. eine Rufnummer auf die das Telefon reagieren soll an, bleibt es stumm.Wenn ich nun mal das Telefon ausschalte und z.B. PhonerLite mit den Userdaten des Telefons anmelde und mit meinem Handy die Nummer wähle, reagiert PhonerLite auf den Anruf. Der Fehler muss also in der Konfiguration des Telefons liegen und nicht bei der Telefonanlage.Anbei mal meine Konfigurationsdateien:;SIPDefault.cnf
image_version: P0S3-8-12-00
proxy1_address: "192.168.1.117" ; Can be dotted IP or FQDN
proxy2_address: "" ; Can be dotted IP or FQDN
proxy3_address: "" ; Can be dotted IP or FQDN
proxy4_address: "" ; Can be dotted IP or FQDN
proxy5_address: "" ; Can be dotted IP or FQDN
proxy6_address: "" ; Can be dotted IP or FQDN
proxy1_port: 5060
proxy2_port: 5060
proxy3_port: 5060
proxy4_port: 5060
proxy5_port: 5060
proxy6_port: 5060
proxy_register: 1
timer_register_expires: 3600
preferred_codec: g711ulaw
dtmf_inband: 1
(default), avt_always - always avt )
dtmf_outofband: avt
(default), 4-3db up, 5-6dB up)
dtmf_db_level: 3
timer_t1: 500 ; Default 500 msec
timer_t2: 4000 ; Default 4 sec
sip_retx: 10 ; Default 10
sip_invite_retx: 6 ; Default 6
timer_invite_expires: 180 ; Default 180 sec
dial_template: dialplan
tftp_cfg_dir: "" ; Example: ./sip_phone/
to Admin Guide for Specifics)
sntp_server: "192.53.103.104" ; SNTP Server IP Address
sntp_mode: anycast ; unicast, multicast, anycast, or directedbroadcast (default)
time_zone: EAST ; Time Zone Phone is in
dst_offset: 1 ; Offset from Phone's time when DST is in effect
dst_start_month: April ; Month in which DST starts
dst_start_day: "" ; Day of month in which DST starts
dst_start_day_of_week: Sun ; Day of week in which DST starts
dst_start_week_of_month: 1 ; Week of month in which DST starts
dst_start_time: 02 ; Time of day in which DST starts
dst_stop_month: Oct ; Month in which DST stops
dst_stop_day: "" ; Day of month in which DST stops
dst_stop_day_of_week: Sunday ; Day of week in which DST stops
dst_stop_week_of_month: 8 ; Week of month in which DST stops 8=last week of month
dst_stop_time: 2 ; Time of day in which DST stops
dst_auto_adjust: 0 ; Enable(1-Default)/Disable(0) DST automatic adjustment
time_format_24hr: 1 ; Enable(1 - 24Hr Default)/Disable(0 - 12Hr)
date_format : D/M/Y
control, 3-on with no user control)
dnd_control: 0 ; Default 0 (Do Not Disturb feature is off)
control, 3-enabled no user control)
callerid_blocking: 2 ; Default 0 (Disable sending all calls as anonymous)
anonymous_call_block: 0 ; Default 0 (Disable blocking of anonymous calls)
dtmf_avt_payload: 101 ; Default 101
sync: 1 ; Default 1
proxy_backup: "" ; Dotted IP of Backup Proxy
proxy_backup_port: 5060 ; Backup Proxy port (default is 5060)
proxy_emergency: "" ; Dotted IP of Emergency Proxy
proxy_emergency_port: 5060 ; Emergency Proxy port (default is 5060)
enable_vad: 0 ; VAD setting 0-disable (Default), 1-enable
nat_enable: 1 ; 0-Disabled (default), 1-Enabled
nat_address: "" ; WAN IP address of NAT box (dotted IP or DNS A record only)
voip_control_port: 5060 ; UDP port used for SIP messages (default - 5060)
start_media_port: 16384 ; Start RTP range for media (default - 16384)
end_media_port: 32766 ; End RTP range for media (default - 32766)
nat_received_processing: 0 ; 0-Disabled (default), 1-Enabled
outbound_proxy: "192.168.1.117" ; restricted to dotted IP or DNS A record only
outbound_proxy_port: 5060 ; default is 5060
upon hangup
cnf_join_enable : 1 ; 0-Disabled, 1-Enabled (default)
ringing
semi_attended_transfer: 1 ; 0-Disabled, 1-Enabled (default)
phone)
telnet_level: 2 ; 0-Disabled (default), 1-Enabled, 2-Privileged
; 0-Disabled (default), 1-Enabled
services_url: "" ; 
directory_url: "" ; 
logo_url: "" ; 
http_proxy_addr: "" ; 
http_proxy_port: 80 ; 
dyn_dns_addr_1: "" ; 
dyn_dns_addr_2: "" ; 
dyn_tftp_addr: "" ; 
remote_party_id: 0 ; 
call_hold_ringback: 0 ; Default 0 (Call Hold Ringback feature is off)
stutter_msg_waiting: 0 ; 0-Disabled (default), 1-Enabled
messages_uri: 8500
call_stats: 0
transfer_onhook_enabled:1

Und die Konfigurationsdatei des Telefons:# SIP Configuration Generic File

# Call Manager
call_manager1_addr: "192.168.1.117"
call_manager1_sip_port: 5060
call_manager2_addr: "192.168.1.117"
call_manager2_sip_port: 5060
proxy1_address: "USECALLMANAGER"
proxy1_port: 5060
line1_name: "80"
line1_authname: "80"
line1_password: "Passwort"
line1_displayname: "Schreibtisch 1"
line1_shortname: "St1"
proxy2_address: "USECALLMANAGER"
proxy2_port: 5060
line2_name: "80"
line2_authname: "80"
line2_password: "Passwort"
line2_displayname: "St--"
line2_shortname: "St2"
phone_label: "Schreibtisch 1"
phone_prompt: "Mein Telefon"
phone_password: "cisco"

LUKEars · Answer

ulaw ist in Europa etwas komisch... https://www.rfwireless-world.com/Terminology/a-law-vs-u-law.html

oder?

kannst du ein tcpdump auf dem Asterisk Server laufen lassen? dann würdest du eventuelles Gequengel der Cisco-Box sehen... SIP ist ja ohne Verschlüsselung...

tcpdump -i eno1 -nvvv port 5060

Cisco 7940G - reagiert nicht auf Anrufe von außen?

1 Antwort