Wieso startet MySQL in Xampp nicht?

Hallo ich habe ein Problem. In Xampp kann ich Mysql nicht starten. Im Controll Panel wird folgendes angezeigt: Versuche MySQL zu starten...

16:24:54 [mysql] Statusänderung erkannt: gestartet

16:25:07 [mysql] Statusänderung erkannt: gestoppt

16:25:07 [mysql] Fehler: MySQL wurde unerwartet beendet

16:25:07 [mysql] Ursache könnte ein geblockter Port, fehlende Abhängigkeiten,

16:25:07 [mysql] fehlende Berechtigungen, ein Absturz oder ein Abbruch einer anderen Methode sein.

16:25:07 [mysql] Drücke den Logs Button um error logs zu sehen und prüfe

16:25:07 [mysql] im Windows Event Viewer für weitere Hinweise

16:25:07 [mysql] Wenn du weitere Hilfe benötigst, kopiere den kompletten Inhalt des Log Fensters

16:25:07 [mysql] und füge ihn als Ergänzung in einem neuen Forum Eintrag hinzu.

In den Logs steht: 2024-02-08 16:24:55 0 [Note] InnoDB: Mutexes and rw_locks use Windows interlocked functions

2024-02-08 16:24:55 0 [Note] InnoDB: Uses event mutexes

2024-02-08 16:24:55 0 [Note] InnoDB: Compressed tables use zlib 1.2.12

2024-02-08 16:24:55 0 [Note] InnoDB: Number of pools: 1

2024-02-08 16:24:55 0 [Note] InnoDB: Using SSE2 crc32 instructions

2024-02-08 16:24:55 0 [Note] InnoDB: Initializing buffer pool, total size = 16M, instances = 1, chunk size = 16M

2024-02-08 16:24:55 0 [Note] InnoDB: Completed initialization of buffer pool

2024-02-08 16:24:55 0 [Note] InnoDB: Starting crash recovery from checkpoint LSN=1940924999

2024-02-08 16:24:55 0 [Note] InnoDB: 128 out of 128 rollback segments are active.

2024-02-08 16:24:55 0 [Note] InnoDB: Removed temporary tablespace data file: "ibtmp1"

2024-02-08 16:24:55 0 [Note] InnoDB: Creating shared tablespace for temporary tables

2024-02-08 16:24:55 0 [Note] InnoDB: Setting file 'C:\realxampp\mysql\data\ibtmp1' size to 12 MB. Physically writing the file full; Please wait ...

2024-02-08 16:24:55 0 [Note] InnoDB: File 'C:\realxampp\mysql\data\ibtmp1' size is now 12 MB.

2024-02-08 16:24:55 0 [Note] InnoDB: 10.4.27 started; log sequence number 1940925008; transaction id 8544919

2024-02-08 16:24:55 0 [Note] InnoDB: Loading buffer pool(s) from C:\realxampp\mysql\data\ib_buffer_pool

2024-02-08 16:24:55 0 [Note] Plugin 'FEEDBACK' is disabled.

2024-02-08 16:24:55 0 [Note] Server socket created on IP: '::'.

Konfigurationseinstellungen sind im Kommentar unter der Frage.

...zum Beitrag

# Example MySQL config file for small systems.

#

# This is for a system with little memory (<= 64M) where MySQL is only used

# from time to time and it's important that the mysqld daemon

# doesn't use much resources.

#

# You can copy this file to

# C:/realxampp/mysql/bin/my.cnf to set global options,

# mysql-data-dir/my.cnf to set server-specific options (in this

# installation this directory is C:/realxampp/mysql/data) or

# ~/.my.cnf to set user-specific options.

#

# In this file, you can use all long options that a program supports.

# If you want to know which options a program supports, run the program

# with the "--help" option.

# The following options will be passed to all MySQL clients

[client]

# password    = your_password 

port=3306

socket="C:/realxampp/mysql/mysql.sock"

# Here follows entries for some specific programs 

# The MySQL server

default-character-set=utf8mb4

[mysqld]

port=3306

socket="C:/realxampp/mysql/mysql.sock"

basedir="C:/realxampp/mysql"

tmpdir="C:/realxampp/tmp"

datadir="C:/realxampp/mysql/data"

pid_file="mysql.pid"

# enable-named-pipe

key_buffer=16M

max_allowed_packet=1M

sort_buffer_size=512K

net_buffer_length=8K

read_buffer_size=256K

read_rnd_buffer_size=512K

myisam_sort_buffer_size=8M

log_error="mysql_error.log"

# Change here for bind listening

# bind-address="127.0.0.1" 

# bind-address = ::1     # for ipv6

# Where do all the plugins live

plugin_dir="C:/realxampp/mysql/lib/plugin/"

# Don't listen on a TCP/IP port at all. This can be a security enhancement,

# if all processes that need to connect to mysqld run on the same host.

# All interaction with mysqld must be made via Unix sockets or named pipes.

# Note that using this option without enabling named pipes on Windows

# (via the "enable-named-pipe" option) will render mysqld useless!

# commented in by lampp security

#skip-networking

#skip-federated

# Replication Master Server (default)

# binary logging is required for replication

# log-bin deactivated by default since XAMPP 1.4.11

#log-bin=mysql-bin

# required unique id between 1 and 2^32 - 1

# defaults to 1 if master-host is not set

# but will not function as a master if omitted

server-id =1

# Replication Slave (comment out master section to use this)

#

# To configure this host as a replication slave, you can choose between

# two methods :

#

# 1) Use the CHANGE MASTER TO command (fully described in our manual) -

#  the syntax is:

#

#  CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,

#  MASTER_USER=<user>, MASTER_PASSWORD=<password> ;

#

#  where you replace <host>, <user>, <password> by quoted strings and

#  <port> by the master's port number (3306 by default).

#

#  Example:

#

#  CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,

#  MASTER_USER='joe', MASTER_PASSWORD='secret';

#

# OR

#

# 2) Set the variables below. However, in case you choose this method, then

#  start replication for the first time (even unsuccessfully, for example

#  if you mistyped the password in master-password and the slave fails to

#  connect), the slave will create a master.info file, and any later

#  change in this file to the variables' values below will be ignored and

#  overridden by the content of the master.info file, unless you shutdown

#  the slave server, delete master.info and restart the slaver server.

#  For that reason, you may want to leave the lines below untouched

#  (commented) and instead use CHANGE MASTER TO (see above)

#

# required unique id between 2 and 2^32 - 1

# (and different from the master)

# defaults to 2 if master-host is set

# but will not function as a slave if omitted

#server-id    = 2

#

# The replication master for this slave - required

#master-host   =  <hostname>

#

# The username the slave will use for authentication when connecting

# to the master - required

#master-user   =  <username>

#

# The password the slave will authenticate with when connecting to

# the master - required

#master-password =  <password>

#

# The port the master is listening on.

# optional - defaults to 3999

#master-port   = <port>

#

# binary logging - not required for slaves, but recommended

#log-bin=mysql-bin

# Point the following paths to different dedicated disks

#tmpdir = "C:/realxampp/tmp"

#log-update = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using BDB tables

#bdb_cache_size = 4M

#bdb_max_lock = 10000

# Comment the following if you are using InnoDB tables

#skip-innodb

innodb_data_home_dir="C:/realxampp/mysql/data"

innodb_data_file_path=ibdata1:10M:autoextend

innodb_log_group_home_dir="C:/realxampp/mysql/data"

#innodb_log_arch_dir = "C:/realxampp/mysql/data"

## You can set .._buffer_pool_size up to 50 - 80 %

## of RAM but beware of setting memory usage too high

innodb_buffer_pool_size=16M

## Set .._log_file_size to 25 % of buffer pool size

innodb_log_file_size=5M

innodb_log_buffer_size=8M

innodb_flush_log_at_trx_commit=1

innodb_lock_wait_timeout=50

## UTF 8 Settings

#init-connect=\'SET NAMES utf8\'

#collation_server=utf8_unicode_ci

#character_set_server=utf8

#skip-character-set-client-handshake

#character_sets-dir="C:/realxampp/mysql/share/charsets"

sql_mode=NO_ZERO_IN_DATE,NO_ZERO_DATE,NO_ENGINE_SUBSTITUTION

log_bin_trust_function_creators=1

character-set-server=utf8mb4

collation-server=utf8mb4_general_ci

[mysqldump]

max_allowed_packet=16M

[mysql]

# Remove the next comment character if you are not familiar with SQL

#safe-updates

[isamchk]

key_buffer=20M

sort_buffer_size=20M

read_buffer=2M

write_buffer=2M

[myisamchk]

key_buffer=20M

sort_buffer_size=20M

read_buffer=2M

write_buffer=2M

[mysqlhotcopy]

...zur Antwort

Zuerst musst du deiner html Datei die Endung .php geben damit möglicher php Code ausgeführt werden kann. Anschließend kannst du in einen beliebigen teil deines Bodys einen php Block platzieren. In diesen kannst du dann dein Code für den Log- In rein pasten.

<?php

    <form action="06-formulare-post.php" method="POST">

    <?php // Name, Eingabefeld mit dem Wert'falls es leer ist, gebe das bereits geschriebene aus'?>

    <h3>Vorname</h3><input type="text" name="firstname" value="<?php if(!empty($_POST['firstname'])) echo $_POST['firstname']; ?>" /><br>

    <?php // Nachname, Eingabefeld mit dem Wert'falls es leer ist, gebe das bereits geschriebene aus'?>

    <h3>Nachname</h3><input type="text" name="lastname" value="<?php if(!empty($_POST['lastname'])) echo $_POST['lastname']; ?>" /><br>

    <?php // Passwort, Eingabefeld?>

    <h3>Passwort</h3><input type="password" name="password" /><br><br><br>

    <?php // Abschicken, Button?>

    <input type="submit" value="Abschicken!" /><br>

?>

Die beiden fettgeschriebenen tags stehen für den Anfang und das Ende eines Blocks.

Hoffe ich konnte helfen

...zur Antwort
Weitere Inhalte können nur Nutzer sehen, die bei uns eingeloggt sind.